Buying a Water Softener: What You Need To Do

When you want to buy a water treatment system, you need to think about a few things first before purchasing anything. You have to check my review on jcer blog before going through this short guide that will prompt you to make this task a lot easier:

  1. Test your water at home in a bid to determine its level of hardness. You can achieve this by shopping for a home-test kit that determines the level of how hard your water is. You could also send your water sample for testing to get a report telling you about the mineral constituents of your water per gallon. If your results happen to be in the high numbers then that points to the fact that your water is very hard. You will require a very good softening system to eliminate all the undesirable mineral contents that harden your water.
  2. Find out what size you require by estimating the capacity needed to produce clean softened water in your house. Generally, a regular family size of four or five will require 24,000 gallons. The larger the capacity the less frequent you will also have to make use of the softener.
  3. Decide on what type of softener to get. There are several types of softeners such as mechanical, magnetic, and chemical softeners.

Here are some Check My Review on JCER Blog features to weigh when buying a water softener:

1. Size/Capacity

It’s critical to figure out how large a water softener system you need and the capacity. Make sure to factor in your household’s water consumption. The key is to pick a unit that can provide enough soft water for your company but not require you to pay for capacity you won’t be using.

A key factor to issue to keep in mind is the exchange of salt for calcium/magnesium, and other minerals that are contained in the water. Make sure the unit’s recharge cycle takes place every 3 days. It’s critical for the system to provide enough soft water for your household during that time. You can do some basic calculations to figure out how much water you’ll need to soften during that timeframe.

2. Saltless water softener units

The amount of salt used in standard water softener systems is quite low. However, if you want to control your salt intake then you could consider a different option. For example, there are options that use potassium chloride for the in exchange. The process of reverse osmosis is used to filter the hard water removes salt in the water.

There’s also the option to only soften hot water. This results in your drinking water being untreated and non-salty. This can be a great option if you have high blood issues, for example.

3. Water hardness

This issue is related to the water you’re using now instead of the water softener system you pick. You can hire a water testing company to do a test to conduct the test for you. Another option is to buy a home test kit and do the testing yourself. There’s different types of testing but most of them require you to dampen a kit’s test strip. It turns a certain color due to the minerals contained in the water. There’s also other types of test kits.

For example, one type causes the water to change to a particular color based on the hardness. Whichever testing method you use the key is to know the hardness of your water so you’ll also know what your target softness is.

4. Dual Tank System

There’s usually a tank included in the system that contains materials used to remove the unwanted minerals from water. This happens as water enters the water softener system’s tank. How does it work? Hard water first flows into the tank. Then after the softening process is done soft water then flows out.

A second tank holds salt water that’s used throughout the recharging phase. This helps to flush out minerals from the material used for water softening. In this phase the system is offline for the process of softening water.

If you install a dual tank system it helps to makes the water that’s softened available 24/7. In the case you have a big household or consume tons of water you should consider a small 2-tank softener. This can be a more economical option than installing a large unit.

Posted by keyboards on fire